JUMO
More than sensors+automation
- Home
- Products
- Liquid analysis
- Conductivity
- Measuring cells/Sensors
- Conductive
Conductive
- Inexpensive, compact design type
-
Two-electrode principle
-
Proven versions for industrial use
-
Large measuring range span
-
Can be used up to +55 °C
- Two-electrode principle
- For measuring ranges from 0.05 µS/cm to 1 mS/cm
- Large selection of process connections
- Versions that meet pharmaceutical requirements available with certificate
- Two-electrode principle
- Special graphite electrodes
- Cell constants K = 1.0
- Robust, compact sensor
- For measuring ranges from 0.1 µS/cm to 5 mS/cm
- Heat and cold resistant at operating temperatures from -40 to +100 °C
- Chemically resistant to aggressive measured media
- Protection type IP68
- Fills the gap between conductive and inductive measuring cells
- Very wide measuring range possible
- Hygienic design
- Hygienic process connections
- Adapters enable easy connection to a large variety of processes
- Physiologically safe materials
- Delivery includes quality certificate for cell constant, surface roughness, and FDA approved materials
- Bus-compatible JUMO digiLine or IO-Link interface
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatically with Pt100, PT1000, or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number and duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- For matching sensors see data sheets 202922, 202923, 202924, 202925, 202930
- Bus-compatible JUMO digiLine or IO-Link interface
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number and duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- Bus-compatible JUMO digiLine or IO-Link interface
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number/duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- Bus-compatible JUMO digiLine or IO-Link interface
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number/duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- Bus-compatible JUMO digiLine or IO-Link interface
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number/duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- Bus-compatible JUMO digiLine or IO-Link interface
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number/duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- Bus-compatible JUMO digiLine interface or IO-Link
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number/duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
- Bus-compatible JUMO digiLine or IO-Link interface
- JUMO digiLine interface downward compatible to Modbus RTU
- Integrated temperature compensation (automatic with Pt100, Pt1000 or manual value specification)
- Calibration possible on the transmitter or via PC in a laboratory (relative cell constant; temperature coefficient)
- Storage of calibration data and calibration logbook in the JUMO digiLine electronic components
- Recording of extreme process values (drag indicator function, number/duration of limit value exceedances)
- With digital parameterization interface (JUMO DSM)
